DTF Transfers can go on any T-shirt. It has a thinner feel than vinyl. Adult S longest side Approximately 11" Adult longest side is Approximately 12" Adult XL longest side is Approximately 13" Youth 9" Toddler 8" Infant 6" Must use a Heat Press Pressing Instructions Heat press temperature should be set to 325 F. Prior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer & allow the transfer to warm up for 30-60 seconds & this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process. After the transfer is warmed up, it is ready for step 2. Use Medium to heavy Pressure to press the moisture out of your shirt & then press the transfer on the shirt for 15 seconds, wait until cool & peel. Use a cover sheet (Teflon or white butcher paper/copier paper) after you’ve peeled the transfer, press again for 5-10 seconds. If printing small print or small text, press for 20 seconds using heavy pressure & let the transfer cool a bit before peeling. If for any reason that the print begins to lift off the shirt, usually due to an inexpensive heat press Don’t freak out, STOP PEELING & PRESS IT AGAIN. Most likely your heat press has uneven pressure & heat. Processing Time 2-3 Business Days Machine wash cold Tumble dry low Ready To Press Dtf Transfer Fish With Flag
